HEIDENHAIN MANUALplus 4110 Pilot - Manual (Page 43)

43
DIN-Zyklus
DIN Cycle
You only need to define the number of the DIN macro in the input
window.
The machine data that are programmed in the cycle (in Manual mode:
the currently active machine data) become effective as soon as you
start cycle execution. You can change the machine data (S, F, T) at any
time by editing the DIN macro.
In this cycle, no start point is defined. Please keep in mind that
the tool moves on a diagonal path from the current position to
the first position that is programmed in the DIN macro.