HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 91)

5
Probes
71
When the operator elects to continue probing the remaining points, the green arrow points to each missing
point which is signified by a large X. When the stage is moved to position the single edge probe and arrow
at the X and the Enter button is pressed, the next missing point is shown and the green arrow points to it.
When all the remaining missing points are entered, the Finish key is pressed to complete the measurement
and store the feature data in the Feature list.
The feature and probed points can be reviewed in detail by touching the View button if desired.
The Multiple edge probe seeds three points and user is prompted to move the green arrow into the red circle
Probing