HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 75)

5
Probes
55
2 Touch the desired probe type
button. The probe pop-up screen
will close and the new probe will
be displayed. In this example the
Multi-edge probe is selected.
Selecting a probe color
The probe color can be selected at any time from one of nine colors that are shown on the probe pop-up
screen. To select the probe color:
1 Touch any part of the current
probe on the Video window. The
nine color choices will be shown
on the probe pop-up screen.
2 Touch the desired probe
color button. The probe pop-up
screen will close and the new
probe color will be displayed. In
this example the red probe color
is selected.
NOTE
The color of the single edge and multiple edge probe circles (at the center of the probes)
cannot be changed because color is used to indicate whether or not an edge has been
detected. Red circles indicate that no edge has been detected. Green circles indicate
that an edge has been detected. The color of the remaining straight line portions of
edge probes can be changed.
Using Video Probes