HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 40)

20 QC-300 Series User’s Guide
CNC and other Extra tab functions
Additional CNC functions for programming, motion control and Extra tab formatting functions can also be
made available in the Extra tab as described in Chapter 11: Setup, in the Display screen section.
Extra tab functions
Space menu insert
The space insert are included in the Ex-
tra tab to separate control functions into
groups on the tab.
Divider line menu insert
The divider line insert are included in the Extra
tab to separate control functions into groups on
the tab without using a space insert.
Data prompt function
The data prompt function is included in the Extra tab to send a user-defined measurement such as X
position, Y position, radius or angle to the serial port, USB printer or USB drive as a file. When the
user touches the data prompt function, a prompt message is displayed and the user selects the desired piece
of measurement data to be transmitted.
Laser pointer ON/OFF
The laser pointer ON/OFF function is included in the Extra tab to toggle the laser pointer on or off.
When the user touches the laser pointer ON/OFF function, the laser is toggled on or off.
Joystick motor speed
The Joystick motor speed function is included in the Extra tab of systems with the
CNC option to adjust the joystick control of motor speed. When the user touches
the Joystick motor speed function, the joystick control of motor speed is toggled
between fast and slow.
Axis lock
The Axis lock function is included in the Extra tab of systems with the
CNC option to restrict stage motion to only one axis. When axis lock is on,
motion is permitted only along one axis; diagonal motion is not permitted.
When the user touches the Axis lock function, axis lock is toggled on or off.
Extra tab divided by space into data and CNC groups
Extra tab divided by line into data and CNC groups
Fast Slow
Axis lock
on
Axis lock
off