HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 102)

82 QC-300 Series User’s Guide
4 Touch the axis value fields and enter the zero or non-zero values to define the datum location. Press
the Enter key to enter each value. In this example, a datum is specified at X=0.5, Y=0.5.
The new datum will be shown at the current probe position with the
values entered.
Touch the X-axis value field... to select it for data entry... then enter a value and press Enter
Touch the Y-axis value field... to select it for data entry... then enter a value and press Enter