HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 61)

41
4
Quick Start
4 Move the stage to position the multiple edge tool into the center of the large circle in the QC Quickie
slide and press the Enter key. The measurement will be completed and the circle data will be stored in the
feature list.
The feature and probed points can
be reviewed in detail by touching
the DRO or View button if de-
sired.
NOTE
More information regarding the use of the multiple edge probe is contained in
Chapter 5: Probes. More information regarding performing measurements is
contained in Chapter 6: Measuring.
Move the stage to position... the probe inside the circle... and press Enter to complete
Measuring Features