HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 202)

182 QC-300 Series User’s Guide
Running programs
Programs are run by selecting the desired program and
touching the Run icon as shown in this diagram.
The operator will position the part and collect measurement data points in response to program text and the
green run-time arrow displayed on the screen. When the program has successfully completed executing,
feature data is shown in the feature list and the screen leaves the program execution mode and displays
current position.
To run a program:
1 Touch the Program tab to display the program screen and then touch a program title to select the
desired program.
Touch the Run icon to run the selected program.
2 During execution after the datum is established, text and the green run-time arrow will guide the
operator through the program measurement steps.
When the program is finished, the feature data will be shown in the Feature list and the current position
will be shown.