HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 174)

154 QC-300 Series User’s Guide
Selecting a specific tolerance
Touch the Tolerance menu title and then select the specific tolerance from the drop-down menu. The true
position tolerance is selected in this example.
Entering nominal, limit or tolerance values
In this example, the Nominal and Tol Dia (Tolerance diameter around the nominal position) values are
entered by touching the desired data fields and entering a new values using the number keys. Error and
Deviation values are generated as soon as the Nominal and Tol Dia values are entered.
Pass/fail results are indicated by green and red colors in the tolerance screen and in the feature list. Pass is
indicated by green, fail is indicated by red in the tolerance screen.
Any tolerance failure will be indicated by a red square next to the
feature in the feature list. A green square will be displayed
in the feature list when all tolerance tests pass.
The Nominal, Tol Dia and Limit values are entered... resulting in new error and deviation values
Green square indicates pass