HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 23)

Overview
Video camera inputs are displayed on the color LCD and support NTSC and Pal formats as composite video
and S-video signals. Video images can be stored as JPEG snapshots using the optional image archiving
functions.
Measurements viewed on the LCD can be transmitted to a PC over USB or RS-232 ports or to a printer
over the USB port.
The compact ergonomic design and adjustable-tilt front panel of the QC-300 allow users to locate and
mount the instrument in a wide variety of environments that accommodate nearly any viewing requirement.
The tilt front panel can be adjusted and secured in any convenient position. Rubber feet on the bottom
prevent slipping when the system is not permanently bolted to a work surface using the bolt holes provided
in the mounting stand.
Optional foot switch is available for operation when the user is not close to the front panel. All the optional
accessories for the QC-300 are shown in detail at the rear of this guide in Chapter 14: Options.
Speaker jack
Encoder inputs
Video inputs
Tilt adjust
RS-232 port
USB port
Lighting and zoom
Features
External footswitch CNC outputs Not used