HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 260)

240 QC-300 Series User’s Guide
Encoders screen
The Encoders screen contains data and choice fields
for specifying encoder resolution, units of measure, en-
coder type, reference marks and other critical encoder
parameters for each measurement axis.
Selecting an axis to configure
Selections are made by repeatedly touching the Axis
choice field to cycle through all the available measure-
ment axes.
In this example, the measurement axis choices (X, Y and Z) are cycled by repeatedly touching the Axis
choice field.
Specifying encoder resolution
Encoder resolution is entered into the Resolution data field using the numeric keys on the front panel.
Specifying encoder type
Encoder type is toggled between TTL and Analog by touching the
Type choice field.