HEIDENHAIN ND 1300 VED and Crosshair Systems User Manual
Page 63
43
4
Quick Start
Select a specific tolerance
Touch the Tolerance menu title and then select the specific tolerance from the drop-down menu. The true
position tolerance is selected in this example.
Enter nominal, limit or tolerance values
In this example, the Nominal and Tol Dia (Tolerance diameter around the nominal position) values are
entered by touching the desired data field and entering a new value using the number keys. Error and
Deviation values are generated as soon as the Nominal and Tol Dia values are entered.
Pass/fail results are indicated by green and red colors in the tolerance screen and in
the feature list. Pass is indicated by green, fail is indicated by red in the tolerance
screen. Any tolerance failure will be indicated by a red mark next to the feature in
the feature list. A green mark will be displayed in the feature list when all tolerance
tests pass.
NOTE
More information regarding tolerances is contained in
Chapter 7: Tolerancing.
The Nominal, limit and Tol Dia values are entered...
resulting in new error and deviation values
Pass indication is a
green square
Applying Tolerances