HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 192)

172 QC-300 Series User’s Guide
Applying a tolerance
Tolerance operations are described in Chapter 7: Tolerancing. In this example, a true position tolerance
of 0.025 mm will be applied to the hole feature measured in the last step.
Touch the Tol button to display the Tolerance screen, apply the 0.025 mm true position tolerance and touch
the Video button to return to the Video screen.
Reporting results
Measurement results can be printed on the USB port or transmitted to a computer on the RS232 serial port.
Parameters governing reports and data transmissions are configured in the Print setup screen described in
Chapter 10: Communication, and in Chapter 11: Setup.
Result reporting is included in a program by simply pressing the Print key while in record-
ing a program.
Touch the Tol button... apply the tolerance and touch the
Video button...
to return to the Video screen