HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 206)

186 QC-300 Series User’s Guide
Capturing JPEG still images
Touch the Camera icon to capture the current video image as a JPEG still. The captured image will be
saved on the QC-300 internal C: drive and will include the measurement crosshairs and stake marks if the
Archive Crosshair feature is enabled in the VED setup Screen described in Chapter 11: Setup.
To capture a JPEG still:
1 Display the desired image in the video window. It is often desirable to capture a JPEG of the measure
screen immediately after a measurement.
2 Touch the Archive tab, and then touch the Camera icon. A message will be displayed asking you to
wait while the image is being captured.
Image screen
Captured JPEG image features will be add-
ed to the feature list and shown in the Im-
age screen. The image will be highlighted
around its edge by a red line and the image
markup tools will be shown in the Archive
tab at the bottom of the screen.
Touch the Archive tab... then touch the camera icon... to capture a JPEG still