HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 54)

34 QC-300 Series User’s Guide
Starting program recording
To record the following activities
as a program:
1 Touch the Program tab to dis-
play the program screen and then
touch the Record icon. The text
entry screen will be displayed.
2 Enter a program title and
press the Finish key. The DRO
or Video screen will be displayed.
Touch the Measure tab to begin
measurements.
Selecting a probe
To select a new probe:
1 Select a new probe type by
touching any part of the current
probe on the Video window. The
four probe choices will be shown
on the probe pop-up screen.
2 Touch the desired probe type
button. The probe pop-up screen
will close and the new probe will
be displayed. In this example
the straight crosshair probe is
selected.
NOTE
More information regarding preparing and using probes is contained in
Chapter 5: Probes.