HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 117)

97
6
Measuring
Points constructed from a line
Up to four point constructions can be made from a line:
• Midpoint:
The center of the line
• End point 1:
The first endpoint of the line
• End point 2:
The second endpoint of the line
• Anchor point:
The intersection of the line and the perpendicular from the datum to the line
To construct a point from a line:
1 Touch the Measure Point icon
2 Touch the desired line feature
3 Press the Enter key
4 Press the Finish key
The midpoint of the line will be constructed. Alternative point constructions can be selected from the
drop-down menu in the DRO window.
Midpoint End point 1 End point 2 Anchor point
Constructing Features