Grass Valley NV9649 v.1.1 - Manual (Page 65)

53
NV9649
User’s Guide
Source A source button selects a source. (Note that a quick source button selects a
source and also performs an immediate take.)
The source selected by a source button is preset to be take to the current desti-
nation of the NV9649. (No takes can occur at the NV9649 if the panel option
‘Server Panel Destination Remove’ is checked in the configuration.)
When you configure a source button, a drop-down menu appears: ‘Source
Device’. Choose a device from the list. (The ‘None’ entry is merely a placeholder.
Do not choose ‘None’.)
The button definition section also presents a “level set filter” drop-down list in
which you can select a level set to reduce the number of sources through which
to browse.
The button legend is the source name, unless you check ‘Use Custom Button
Text’ and assign the button your own text.
Source
Mode The button places the panel in source mode. Category selection in source mode
selects a source device. Under server mode, destination categories are ignored
when the panel is in source mode.
Categories that include both source and destination devices appear in both
source mode and destination mode.
The button definition has no fields to configure.
Src/Dst
Mode The button toggles between source and destination modes. Category selections
in source mode select source devices. Category selections in destination mode
select destination devices.
Categories that include both source and destination devices appear in both
source mode and destination mode.
The button definition has no fields to configure.
Take In normal mode, a take button routes the preset source to the selected destina-
tion on selected level or levels. (By default, takes are on all levels.)
In salvo mode, a take button executes a selected salvo.
A take button is disabled (and dark) until it is possible for the operator to execute
a take.
Configurers should provide the operator a ‘Take’ button. The button definition
has no fields to configure.
Take All The button takes the selected (i.e., preset) source to all NV9648 control units.
The button definition has no fields to configure.
Undefined Makes the button undefined and inactive. On the actual panel, it will remain
unused (dark).
Type Description (under Server Mode)