Grass Valley NV9649 v.1.1 - Manual (Page 127)

115
NV9649
User’s Guide
User
The ‘User’ submenu merely displays the configured user ID. (You cannot change it.)
Panel
The panel submenu displays facts about the panel:
The 5 buttons at the left tell you the panel ID, and other useful information about the panel, in
particular, the panel’s IP address. These are useful in a diagnostic situation. This information
helps configurers ensure that they are sending correct configuration file to the correct panel.
 The panel acquires its IP address through DHCP on the NV9000’s panel/router network.
If the ‘Panel ID’ button is high-tally, you may change the panel ID. Normally, only your system
administrator would do that. To change the panel ID, press the panel ID button. A panel ID entry
menu appears containing a keypad:
Press the keys of the keypad to enter a number. The number you enter is displayed on the panel
ID button.
Press Cancel to leave the submenu without changing the panel ID.
Press Save to accept your change to the panel ID and leave the submenu.
‘Manage Configs’
The NV9649 (as the server) and the NV9648s (as the clients) are designed so that when the panel
operator uses the NV9649’s ‘Assign’ button to assign destinations or sources to the various
clients, the assignments are not lost after a restart (owing perhaps to a power failure).
USER USER USER ID USER ID
01 01
EXIT EXIT
PANEL ID PANEL ID
6493 6493
PANEL PANEL
NAME NAME
L649 L649
IP ADDR IP ADDR
192.168. 192.168.
104.84 104.84
SVR NAME SVR NAME L649
L649 EXIT EXIT
PANEL ID PANEL ID
_____649 _____649 0
0 1 1
2 2 3 3 4 4
5 5 6 6 7 7
8 8 9 9
CANCEL CANCEL SAVE SAVE