Saved client assignments – Grass Valley NV9649 v.1.1 User Manual
Page 19
7
NV9649
User’s Guide
Each NV9648 has 3 identical sections and, in client mode, each section functions as a complete
and separate control unit, unrelated to any other NV9648 section. Each displays shows a desti-
nation chosen by the operator of the NV9649. (The NV9649 can also assign sources to the source
buttons of individual NV9648 control units.)
The display in each of the clients’ control units shows the control unit’s current source when the
NV9649 is in source mode and show the control unit’s destination when NV9649 is in destination
mode. See
Here is an example of a system with an NV9649 and 7 NV9648 clients:
In this example, there are 21 control sections in addition to the controls of the NV9649. At any
moment, the operator can route to 21 destinations. The operator can assign different destina-
tions to the control units at any time. The function buttons in each individual control unit apply
only to the destination assigned to that control unit.
Saved Client Assignments
Every time an operator assigns a destination to an NV9648 client or assigns a source to a source
button of a client, those assignments are recorded within the NV9000 system controller. There-
fore, if and when the system controller undergoes a power cycle, the source and destination
assignments of all the NV9648 clients are preserved.
The NV9649 can be configured so that up to 12 different sets of client assignments (or “set-ups”
as they are called in the NV9649’s menu) can be defined, selected, redefined, and otherwise
managed as different operators choose.
A NV9649 always has a default setup and may have eleven other named setups.
NV9649 (1)
3 Panel Sections (7x)
NV9648 (7)