Grass Valley NV9649 v.1.1 - Manual (Page 137)

125
NV9649
User’s Guide
The display test should show that the pixels of the character elements of the displays are
brightly lit.
Press the ‘Push to Test’ button again to start the color test. The first segment of this test shows all
the buttons illuminated in high-tally green. Press the ‘Push to Test’ button again. The next
segment shows low-tally green.
Keep pressing that button until all the colors have been displayed — green, amber, yellow, red,
blue, purple, grey, and white and high and low-tally for each. At this point, the displays now read
button test. Pause for a moment. Do not press ‘Exit’:
Press any button — except the ‘Exit’ button — to test it. The button will flash a few times rapidly
and the number of the button will appear on the display.
Pressing the exit button will terminate the button test and return you to the initial display of
setup mode. At this point
— if you have a assigned your NV9649 a suitable panel ID — you may
connect your NV9649 to the panel network of your NV9000 system.
BUTTON BUTTON
NUMBER NUMBER
12 12
EXIT EXIT
B U T T O N
T E S T
B u t t o n 1 2