Grass Valley NV9649 v.1.1 - Manual (Page 62)

50
Configuration
Button Definitions
Button Functions for Server Mode
These are the button types available for NV9649 configurations under the server model:
Type Description (under Server Mode)
Assign When the panel is in destination mode, the button is used to assign a selected
destination to an NV9648 control unit.
When the panel is in source mode, the button is used to assign a preset source to
a source button of an NV9648 control unit.
(Pressing a source button of the desired NV9648 control unit completes the
assignment.)
See Operating Methods on page 110 for detail.
Changes made to the assignments made for all NV9648 clients are preserved in
the NV9000 system controller and persist across power cycles. We call these sets
of client assignments “setups.” Up to 12 setups may be defined and used. When
you use the ‘Assign’ button, it applies to the currently selected setup and other
setups remain unaffected. You may select one of the defined setups using the
panel’s menu (if it has one). See
Menus under the Server Model on page 114
Broadcast On the data (machine control) level, the button enables a broadcast take to an
additional controlled device, after a broadcast route has been initiated with a
“source is master” control-level take to the first controlled device.
The button definition has no fields to configure.
A broadcast button is useful in dubbing applications or when a backup (redun-
dant) device is in use. See
Broadcast Routes on page 90.
See also the Source Master button, following.