Grass Valley NV9649 v.1.1 - Manual (Page 128)

116
Operation
Menu Mode
The assignments to the clients are saved in the system controller to which the NV9649 and the
NV9648s are connected. We call the set of all client assignments a “setup.” The NV9649 and the
NV9648s are further designed so that you can define up to 12 different named setups. Panel
operators can select any of the different setups for purposes that suit the operations at your
facility. For example, different operators may prefer to use their own client setup. Different client
setups could be used at different times of the day. The choices are flexible.
One setup always exists. That is the “default” setup. The other setups are optional and are
named in the NV9649 configuration page.
There are up to 12 setups because they conveniently fit on the 12 buttons at the left side of the
NV9649.
It is through the ‘Manage Config’ button of the menu that operators can manage these different
setups:
The ‘Manage config’ menu has 3 buttons:
• ‘Recall Set-Up’
• ‘Save Set-Up’
• ‘Clear Set-Up’
‘Recall Set-Up’
This button presents the ‘Recall’ menu in which you can activate one of the named setups. This
button is gray and so are the buttons of the ‘Recall’ menu:
The button for the currently active setup is high-tally.
To activate a different setup, simply press the button for any named setup.
To go back to the ‘Manage Configs’ menu, press ‘Exit Recall’ at the right.
 Whenever you recall, save, or clear any named setup, that setup becomes the current setup.
Subsequent source and destination assignments are recorded in the current setup and other
setups are not affected.
RECALL
SET–UP
EXIT
SAVE
SET–UP
CLEAR
SET–UP
DEFAULT
SET–UP
IVAN
SET–UP
AHMED
SET–UP
EXIT
RECALL
EXIT
MENU
FRED
SET–UP
DOUG
SET–UP