Visara CNA-8000 User Manual
Page 21
CNA-8000 Users Guide and Maintenance Manual
707157-001
1-11
Electrical interference and atmospheric considerations
Electrostatic discharge in the vicinity of the unit should be minimized
by avoiding high resistance floor material and carpeting that does not
have anti-static properties, by avoiding the use of plastic seats and
covers, and by avoiding low humidity levels. The unit should be located
away from areas that generate electromagnetic interference (for
example, transformers, power distribution panels, welding equipment,
motors, and transmitters). Do not put the unit next to fluorescent lights.
The CNA-8000 should not be installed where the atmosphere contains
corrosive elements that can damage the unit.
Do not run the power cable or signal cables in areas that produce
electromagnetic interference (for example, near transformers, switching
equipment, welding equipment, power distribution panels, and under
carpets where vacuum cleaning is done). Also, do not roll heavy
equipment over the cable.