Visara CNA-8000 User Manual
Page 119
CNA-8000 Users Guide and Maintenance Manual
707157-001
8-15
Replacing System Cooling Fans
Installing a new fan: (3 each 9.2 cm. Fans)
Replace the failed fan with an identical 9.2-cm, 12 volt fan (Visara p/n
53925-002).
1. Position the new fan at its proper place in the chassis by fitting the
fan with its housing onto the fan mounts in the chassis.
2. A “click” can be heard if the fan (in its housing) is properly
installed. If the system power is on, the hot-pluggable fan feature
will cause the fan to start immediately upon being connected to its
header on the motherboard.
Installing a new fan: (2 each 8 cm. Fans)
Replace the failed fan with an identical 8-cm, 12 volt fan (Visara p/n
53925-001).
1. Position the new fan at its proper place in the chassis by fitting the
fan with its housing onto the fan mounts in the chassis.
2. A “click” can be heard if the fan (in its housing) is properly
installed. If the system power is on, the hot-pluggable fan feature
will cause the fan to start immediately upon being connected to its
header on the motherboard.