Visara CNA-8000 - Manual (Page 19)

CNA-8000 Users Guide and Maintenance Manual
707157-001 1-9
Jumper Settings
Jumper Description Default Setting
JBT1 CMOS Clear Open
J1 C1/J1 C2 SMB to PCI Slots Open
JPA1 (X7SB4) SCSI Channel Enable Not Used
JPA2 (X7SB4) SCSI Channel Term. Enable Not Used
JPF Power Force On Open
JPG1 VGA Enable 1-2
JPL1/JPL2 Giga-bit LAN 1/LAN 2 Enable 1-2 / 1-2 (Enabled)
JPUSB1 Back Panel USB Wakeup 1-2
JPUSB2 Front Panel USB Wakeup 1-2
JWD Watch Dog Enable 1-2
J9 Buzzer / Speaker 3-4 (Buzzer)
Connectors
Connector Description
COM1/COM2
COM Port 1 & COM 2 Headers J31/J13
Fans 1-6 Chassis/System Fan Headers (Fans 1-5) & CPU Fan6
Floppy J27 Floppy Disk Connector
J9 Speaker Header – On Board
J3P Power Fault Header – Not Used
JAR Alarm Reset Header – Not Used
JF1 Front Panel Control Header
JL1 Chassis Intrusion Header
JPW1 ATX 24-Pin Power Connector
JPW2 12V 8-pin Power Connector
JWOL Wake on LAN Header – Not Used
JWOR Wake on Ring Header – Not Used
KB/MS PS/2 Keyboard/Mouse Connector
LAN1/LAN2 Ethernet RJ45 (Gigabit LAN) Port1/Port2 Connectors
I-SATA0-I-SATA5 6 Intel SATA Ports (JS1-JS6) – Only SATA0, 4,5 Used
PW4 Power SMBus Header (I
2
C)
SCSI (X7SB4) SCSI Channel Connector (JA1) – Not Used, No Socket
SPKR1 Internal Speaker/Buzzer
T-SPGIO1/T-SPGIO2 Serial Link General_Purpose I/O Headers – Not Used
USB 0,1,7,8 Back Panel Universal Serial Bus Ports 0,1 & 7,8 (J15)
USB 2/3, 4/5 Front Panel Accessible USB Headers 2,3,4,5 (J44/J45) – Not
Used
USB 6 Front Panel USB Port 6 (J47) – On Board
VGA VGA Connector (J16) – On Board
PWR LED Power LED – Not Used
LED Indicators
LED Indicator Description
D5 System Status LED Indicator
JLED Power LED – Not Used
LE1 Onboard +5V Standby Power warning LED
LE3/LE4 BIOS POST Code Indicators