Measurement Computing Analyzer488 - Manual (Page 91)

Section 3 Front Panel Operation
3.45
Requests serial printer data bits, 7 or 8. Use [
↑] and [↓] cursor
keys to select. Use [ENTER] or [EXIT] to proceed, [ESC] to
abort print operation.
Printer Stop Bits? 2
Requests serial printer stop bits, 1 or 2. Use [
↑] and [↓] cursor
keys to select. Use [ENTER] or [EXIT] to proceed, [ESC] to
abort print operation.
Printer Parity? None
Requests serial printer parity. Parity can be None, Even, or Odd.
Use [
↑] and [↓] cursor keys to select. Use [ENTER] or [EXIT]
to proceed, [ESC] to abort print operation.
Printer Ctrl? RTS/CTS
Requests serial printer handshake method, XON/XOFF or RTS/CTS.
Use [
↑] and [↓] cursor keys to select. Use [ENTER] or [EXIT]
to proceed, [ESC] to abort print operation.
Print Terms? CR
Requests serial printer terminators. Terminators can be CR, LF, LF
CR, or CR LF. Use [
↑] and [↓] cursor keys to select. Use
[ENTER] or [EXIT] to proceed, [ESC] to abort print operation.
If an IEEE 488 bus printer is selected:
Printer Address? 16
Requests the address of the IEEE 488 printer, from 0 to 30. Use
[
↑] and [↓] cursor keys or numeric keys to enter address. Use
[ENTER] or [EXIT] to proceed, [ESC] to abort print operation.