Measurement Computing Analyzer488 - Manual (Page 201)

Section 5 Analyst488 Software
5.13
5.8.5 Horizontal
This command allows you to change the orientation of the two
windows on the screen. If the File Window and the Analyzer Window are
displayed vertically, you can display them horizontally by selecting
Horizontal.
5.8.6 Vertical
This command allows you to change the orientation of the two
windows on the screen. If the File Window and the Analyzer Window are
displayed horizontally, the user can display them vertically by selecting
Vertical.
5.9 Record Menu
The record menu is used to setup recording and triggering. This menu also lets
you erase and reset the record memory.
5.9.1 Record Enable
This command enables or disables recording of bus events. Each time
the command is issued, the recording state will change. When recording is
enabled, a checkmark will appear in front of the word Record and the
message 'Recording...' will appear on the top row of the screen. When
recording is disabled, nothing will appear in front of the word Record.
This command may also be selected without pulling down the Record
menu by pressing .
5.9.2 Record Status
This command opens a dialog box that indicates the current status of
the Analyzer488 record system. The meaning of each field in this dialog
box is explained below.