Measurement Computing Analyzer488 - Manual (Page 260)

Appendix C Instrument Simulator Command Ssummary
C.2
Command Code Description
End of Reading J0 Assert EOI on end of reading.
EOI J1 Do not assert EOI on end of reading.
J? Output current End of Reading EOI selection.
End of Waveform K0 Assert EOI on end of waveform.
EOI K1 Do not assert EOI on end of waveform.
K? Output current End of Waveform EOI
selection.
Parallel Poll P0 Clear Parallel Poll register.
Response Pn Set Parallel Poll register to n. n = 0 to 255.
P? Output present Parallel Poll register contents.
Serial Poll S0 Clear Serial Poll register.
Response Sn Set Serial Poll register to n. n = 0 to 255.
S? Output present Serial Poll register contents.
Timed SRQ T0 Disable SRQ on timeout.
Tn Generate an SRQ after n milliseconds.
n
= 0 to 65535.
T? Output number of milliseconds remaining
before a timed SRQ.
Status U0 Send the Analyzer488 status string.
U1 Test for a key press.
U2 Wait for a key press.
U? Always outputs U0.
Version V? Output Analyzer488 firmware revision level.
Query
Waveform Wn Select waveform n. n = 0 to 20 (factory
waveforms) n = 21 (User waveform).
W? Output current waveform selection.