Measurement Computing Analyzer488 - Manual (Page 255)

Appendix B Serial Controller Command Summary
B.1
Serial Controller Commands
@ @[CR|LF]
Unlock the Analyzer488 from an inappropriate command.
@@ @@
Return the Analyzer488 to power-on conditions.
ABORT ABORT
Send IFC (SC) or MTA (*SC•CA). Stops bus activity.
ADDRESS ADDRESS{[?]|[addr]}
Set the IEEE 488 bus address of the Analyzer488.
ARM ARM[[?]|[event[event ...]]]
Send a message at the occurence of a particular event.
ASSERT ASSERT{[line][ALL][DATA<data>]}
Assert one or more bus control and/or data lines
CLEAR CLEAR[addr[,addr ...]]
Issue Device Clear (DCL) or Selected Device Clear (SDC).
CONTROLLER CONTROLLER{[?]|[ON|OFF]}
Select the operating mode of the Analyzer488.
DISARM DISARM[;][event[event ...]]
Disable selected ARM events.
DISPLAY DISPLAY{['string']}
Send the message ‘string’ to the front panel display.
DUMP DUMP[{location}TO{location}|{location}
LENGTH{count}]
Return bus events from record memory in S19 format.
ENTER ENTER[addr][#count|term|EOI|;count|;
term|;EOI]
Read data from the IEEE 488 bus.
ERASE ERASE
Erase the entire record memory.