Measurement Computing Analyzer488 - Manual (Page 215)

Section 6 Instrument Simulator
6.5
Y4 Value set by User Waveform Terminator (Zn)
command
Y?
Return current Terminator selection
User Z0 Set User waveform terminator to 'null'
Waveform Zn Set User waveform terminator to n. n = 0 to 255
Terminator Z? Return current User waveform terminator selection
6.6.4 Poll Response Commands
The following commands define the response which the Analyzer488
will transmit when polled.
Parallel Poll P0 Clear Parallel Poll register.
Response Pn Set Parallel Poll register to n. n = 0 to 255.
P? Return current Parallel Poll register contents.
Serial Poll S0 Clear Serial Poll register.
Response Sn Set Serial Poll register to n. n = 0 to 255.
S? Return current Serial Poll register contents.
6.6.5 Miscellaneous Commands
The following commands provide timing and status information about
the Analyzer488.
Error Query E? Return error code and clear error condition.
Timed SRQs T0 Disable SRQ on timeout.
Tn Generate an SRQ at the end of n milliseconds.
n
= 0 to 65535
T? Return number of milliseconds remaining
Status U0 Send the Analyzer488 status string.
U? Returns last status command
Version V? Return revision level of the Analyzer488 firmware
Query