Measurement Computing Analyzer488 - Manual (Page 141)

Section 4 Serial Controller
4.47
1. In this manner, value for Time will be the response time of the
instrument.
To measure the data transfer rate of a particular instrument, (the
time needed by the device to transfer n number of bytes), set the
trigger conditions as follows: MATCH = the talk address of the
instrument, TRIG DELAY = 1, POST COUNT = the larger the
number here, the more accurate the reading. In this manner, the
value for Bytes/sec. will be the desired information.
MODE Any
BUS STATES None
QUERY None
RESPONSE
EXAMPLE PRINT#1,"MEASURE" Read and display data transfer rate of
INPUT#1,A$:PRINT A$ last triggered record sequence