Measurement Computing Analyzer488 - Manual (Page 251)

Appendix A Front Panel Key Summaary
A.1
Front Panel Keys
-HANDSHAKE-
[FAST] Participate in handshaking at speeds up to 1 Mbyte/sec.
[SLOW] Participate in handshaking at speeds from 1 to 10 bytes/sec.
[STEP] Enable Step handshaking and initiate (Talk state) or complete
(Listen state) one handshake sequence.
[RATE] Adjust Slow handshake speed from 1 to 10 bytes / sec.
[NONE] Disable participation in handshaking.
-SOURCE-
[LISTEN] Place Analyzer488 into the Listen state.
[TALK] Place Analyzer488 into the TALK state.
[PRINT] Print data contained in the record memory.
-CONTROL-
[EOI] Toggle the state of the End Or Identify (EOI) bus management
line. The LED indicates the driven state of this line.
[ATN] Toggle the state of the Attention (ATN) bus management line. The
LED indicates the driven state of this line.
[SRQ] Toggle the state of the Service Request (SRQ) management line.
The LED indicates the driven state of this line.
[REN] Toggle the state of the Remote Enable (REN) management line.
The LED indicates the driven state of this line.
[IFC] Pulse the Interface Clear (IFC) management line. The LED
indicates the driven state of this line.