Measurement Computing Analyzer488 - Manual (Page 233)

Section 6 Instrument Simulator
6.23
Timed SRQs Tn
The Timed SRQs command, Tn, enables the Analyzer488 to generate a Service
Request (SRQ) after a specified amount of time has passed. The time period may be
between 0 and 65535 milliseconds (0 to 65 seconds) in increments of 1 millisecond.
SYNTAX: T0 Disable SRQ on timeout (default)
Tn Generate an SRQ at the end of n milliseconds (n =
0 to 65535)
T? Return the amount of time (in milliseconds)
remaining before a timed SRQ will be generated
EXAMPLES: PRINT#1,"CLEAR10" reset the Analyzer488
PRINT#1,"OUTPUT10;T5000X"
generate an SRQ after 5 seconds
after 5 seconds, the Analyzer488
will generate an SRQ.
PRINT#1,"SPOLL10" serial poll the Analyzer488
INPUT#2,C$
PRINT C$
display shows 64 since the
Analyzer488 was the source of the
Service Request.