Measurement Computing Analyzer488 - Manual (Page 121)

Section 4 Serial Controller
4.27
DISPLAY
The DISPLAY command allows the user to display an alphanumeric message on
the 20 character front panel display of the Analyzer488.
A message may be up to 20 characters long. If a message string is longer than
20 characters, only the first 20 characters will be displayed. A space ' ' or null
string '' will clear the display.
This command does not have a query option.
TYPE System command
SYNTAX DISPLAY {['string']}
string is any alphanumeric character string.
RESPONSE The first 20 characters of string are displayed on the front panel
display of the Analyzer488.
MODE any
BUS STATES None
QUERY None
RESPONSE
EXAMPLES PRINT#1,"DISPLAY'Analyzer488'"
PRINT#1,"DISPLAY' '" Clear the display.