Measurement Computing Analyzer488 - Manual (Page 160)

Section 4 Serial Controller
4.66
RESUME
The RESUME command unasserts the Attention (ATN) bus management line. As
the Active Controller, ATN is normally kept asserted by the Analyzer488, but, it must
be unasserted to allow transfers to take place between two peripheral devices. To
allow transfers, the Analyzer488 SENDs the appropriate talk and listen addresses, and
ATN must be unasserted with the RESUME command.
This command does not have a query option.
TYPE High Level Controller command
SYNTAX RESUME
RESPONSE None
MODE High Level Controller
BUS STATES *ATN
QUERY None
RESPONSE
EXAMPLE PRINT#1,"RESUME" unassert ATTENTION line.