Measurement Computing Analyzer488 - Manual (Page 19)

Section 1 Introduction
1.7
Serial Control: Selectable CTS/RTS or XON/XOFF.
Terminators: Selectable CR, LF, LF-CR and CR-LF.
Connector: 9-pin Sub-D male. Serial cable included to connect to
9 or 25 pin IBM PC, XT and AT.
General
Display: 20 character vacuum fluorescent alphanumeric display
with adjustable brightness level.
Indicators: 20 LEDs for various status indications.
Power: 105-125V or 210-250V; 50-60 Hz, 20 VA Max.
Dimensions: 245 mm deep x 280 mm wide x 35 mm high (9.6" x
11" x 1.4").
Weight: 1.8 kg. (4 lbs).
Environment: 0° - 50°C; 0 to 70% R.H. to 35°C. Linearly derate 3%
R.H./°C from 35° to 50°C.
Controls: Power Switch (external), 46 key keypad.
Specifications subject to change without notice .
1.4 Available Accessories
Additional accessories that can be ordered for the Analyzer488 include:
CA-7-1 1.5 foot IEEE 488 Cable
CA-7-2 6 foot IEEE 488 Cable
CA-7-3 6 foot shielded IEEE 488 Cable
CA-7-4 6 foot reverse entry IEEE 488 Cable
CA-47 IBM PC/XT/PS2/AT to Analyzer488 RS-232 Cable
CN-20 Right Angle IEEE 488 adapter, male and female
CN-22 IEEE 488 Multi-tap bus strip, four female connectors in
parallel
CN-23 IEEE 488 panel mount feed-through connector, male and
female
ABC488 IEEE 488 ABC switch
Analyzer488-901 Analyzer488 Instruction Manual
Analyzer488-301 Analyzer488 Carrying Case