Measurement Computing Analyzer488 - Manual (Page 74)

Section 3 Front Panel Operation
3.28
[ESC] The Escape key, [ESC], is used to abort or cancel menu selections.
[ESC]
escapes a menu immediately without proceeding to the
menu's conclusion. Changes within the menu are not accepted when
[ESC]
is used.
[+/-] The Sign key, [+/-], is used as a general purpose data entry key.
The [+/-] key is used to change the sign of numeric values, to
indicate a search direction using [FIND], or to set a "don't care" (
X )
condition in [SETUP] and [FIND] menus.
[SAVE] The Save key, [SAVE] is used to record up to 126 key presses into
one of sixteen keystroke macros. [SAVE], followed by a numeric
key from [0] - [F], stores key presses until [SAVE] is pressed
again, ending the macro. Recall key presses with [SHIFT]
followed by the associated numeric key. Pressing [SAVE] displays
a data input menu:
Save Macro? X
For each key press, a status message is displayed:
Saving to Macro X
Once [SAVE] is pressed again, ending the macro, a status message
is displayed:
End Saving Keys
[HELP] The Help key, [HELP], is used to display information on the front
panel display about individual keys or to give context sensitive help
when the Analyzer488 is displaying menu screens. Pressing
[HELP]
shows a menu:
Select Key for Help
Press any key to see a help message for that key. Or press [HELP]
while viewing a menu to see context sensitive help messages.