Measurement Computing Analyzer488 - Manual (Page 205)

Section 5 Analyst488 Software
5.17
Pressing the Cancel button removes any changes to the current
trigger setup and closes the trigger setup window.
5.9.4 Erase
This command erases the entire record memory of the Analyzer488
and sets the record pointer to zero. Once this command is issued, the next
bus events recorded will be saved starting at location zero.
This command may also be selected without pulling down the
Record menu by pressing .
5.9.5 Zero
This command sets the record pointer to zero but does not affect any
data currently in the Analyzer488 record memory. Once this command is
issued, the next bus events recorded will be saved starting at location zero.
Any data currently in the record memory will be overwritten.
This command may also be selected without pulling down the
Record menu by pressing .
5.10 Search Menu
The search menu lets you look through the data in windows to find specific bus
events.
5.10.1 First
This command places the cursor on the first recorded event in the
most recent recorded sequence. When a File Window is first opened, this
will be the default cursor position and the default reference location.