Measurement Computing Analyzer488 - Manual (Page 90)

Section 3 Front Panel Operation
3.44
pressing [PRINT] followed by [EXIT] will print the record
memory from first to last on the default printer. A status
message is displayed while the Analyzer488 is printing:
Printing...
Print First? 00000
Requests the first record memory location to be printed. Physical
locations, 0 to 32767, or relative locations, -32767 to 32767, may be
used depending on the record memory location address format. Use
[ENTER]
or [EXIT] to proceed, [ESC] to abort printing.
Print Last? 00000
Requests the last record memory location to be printed. Physical
locations, 0 to 32767, or relative locations, -32767 to 32767, may be
used depending on the record memory location address format. Use
[ENTER]
or [EXIT] to proceed, [ESC] to abort print operation.
Print to? Serial Port
Requests which printer to use, Serial Port, or IEEE 488 Bus. Use
[
↑] and [↓] cursor keys to select. Use [ENTER] or [EXIT] to
proceed, [ESC] to abort print operation.
If a Serial Port printer is selected:
Printer Baud? 9600
Requests the serial printer baud rate. Baud rate can be 300, 600,
1200, 2400, 4800, 9600, or 19200. Use [
↑] and [↓] cursor keys to
select. Use [ENTER] or [EXIT] to proceed, [ESC] to abort print
operation.
Printer Data Bits? 8