Gasboy FMS KE200 User Manual
Page 88
Error Messages
Page A-2 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
MEMORY FULL
This indicates that maintenance transaction file is currently filled. No new transactions will be
accepted until space is freed by advancing the “FIRST” transaction pointer. See
Maintenance Transactions (1000 FleetKey only)” on page 26
(1000 FleetKey only)” on page 56
NO DATA LOADED-ID #x
An attempt was made to encode or read a Fleetkey prior to configuring the variable ID fields.
“x” represents the first ID field found, which has not been configured.
NO ENTRY
ENTER button was pressed on the keypad with no prior data input.
ODOM OUT OF RANGE
The odometer value entered while performing maintenance is less than the Fleetkey’s LAST
ODOMETER or greater than the Fleetkey’s LAST ODOMETER plus MAX MILES.
OUT OF RANGE
The entered value is not within an allowable range.
RAM FAILED
Read/write failure was detected on RAM chip during diagnostics test.
ROM FAILED
Checksum error was detected on ROM chip during diagnostics test.
TOTAL ID DIGITS > 20
The sum of all ID field sizes exceeds 20 digits.
TRAN NOT FOUND
The value entered during “RESET TRANS POINTER” keypad function is not available.
TURN OFF "MGR KEY"
A command attempted at the terminal requires the manager key to be placed in the OFF (idle)
position.