Gasboy FMS KE200 - Manual (Page 82)

Encoding Keys Encoding from the Terminal
Page 76 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
2 Press ENTER to display the following:
3 Press F1 until the system displays the following:
4 Press ENTER. The system queries:
5 Press ENTER to clear the file. The system displays “COMMAND COMPLETED”.
6 Press ENTER and the display returns to “RESET ENCODE RECORDS”.
7 To return to “SELECT OPTION: ENCODE”, press PREV.
Encoding from the Terminal
To encode keys from the terminal, use the “ENCODE KEY (EN KE)” command. This
command is discussed in
“Encode Key (EN KE)” on page 38 .