Gasboy FMS KE200 - Manual (Page 84)

Performing Maintenance Perform Maintenance (1000 FleetKey only)
Page 78 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
Perform Maintenance (1000 FleetKey only)
To perform maintenance, proceed as follows:
1 Turn the Manager key to MAINT. The system prompts:
2 Insert the Fleetkey into the receptacle and turn it to the right.
3 If you wish to perform maintenance, press ENTER. The system displays the following:
4 Type up to six digits for work order number and press ENTER. The system displays the
following:
5 Enter a one to four digit technician number and press ENTER. The system displays the
following:
6 Enter all that apply (A, B, C), using the A B C keys to the right of the keypad and press
ENTER. The system displays the following:
7 Enter the vehicle's current odometer and press ENTER. The system queries as shown below.