Gasboy FMS KE200 - Manual (Page 56)

KE200 Setup - Terminal Print Date (PR DA)
Page 50 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
Print Date (PR DA)
Use “PRINT DATE” to print the current system date and time.
At the asterisk prompt, type “PR DA” and press ENTER. The system displays the current
settings as shown below.
03/06/92 11:19:49
Print Format (PR FO)
Use “PRINT FORMAT” to list the fields and values for a particular key type. If you are using
a CRT monitor, this display may scroll off the screen due to its length. To display the data full
screen, you can use the pipe command followed by the word more (that is, “PR FO | more”).
Press any key to continue after a “more”. You can also stop the scroll by pressing the CTRL
and S keys. Then you can resume the scroll by pressing the CTRL and Q keys.
To use Print Format to list the fields and values for a particular key type, proceed as follows:
1 At the asterisk prompt, type “PR FO” and press ENTER. The system prompts: “KEY
TYPE?”