Gasboy FMS KE200 - Manual (Page 21)

MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007 Page 15
Overview KE200 Setup - Standalone
2 – KE200 Setup - Standalone
Overview
The standalone KE200 allows you direct access to all setup, encoding (numeric fields only),
and maintenance procedures. You must enter commands via the keypad and a series of menus
are displayed, which guide you through setup, encoding, and maintenance.
Accessing KE200 Modes
The different modes of the KE200 are determined by the position of the Manager’s key. When
the KE200 is standalone, Idle mode has no function, other than to display the current date and
time. Maintenance mode allows you to view and update maintenance information on a key.
Encode/Setup mode allows access to all system setup parameters and encoding fields. The key
must be in this position for you to set up your system from the KE200 or to encode keys from
the KE200.
Maintenance Mode (1000 FleetKey only)
Note: You can use either the Manager key or the Maintenance key to access Maintenance
mode.
To access Maintenance mode, proceed as follows:
1 Turn the Manager key to MAINT. The system displays the following:
MAINTENANCE MODE:
PERFORM
MAINTENANCE
2 Press ENTER to display the first Perform Maintenance prompt.
PERFORM MAINTENANCE:
INSERT
KEY