Gasboy FMS KE200 - Manual (Page 27)

MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007 Page 21
Load System ID KE200 Setup - Standalone
3 Press ENTER. The currently loaded value appears on the second line of the display.
LOAD STATION ID:
0 0 0
4 Type a one to three digit identifier and press ENTER. The display returns to the following:
SETUP MENU:
LOAD STATION ID
5 To display another primary prompt, press F1 or F2 until the desired prompt appears.
6 To exit back to “SELECT OPTION”, press SETUP > PREV.
Load System ID
Use “LOAD SYSTEM ID” to load the 4-digit system ID of your FleetKey system. This
number is verified with the key when you perform maintenance.
To load system ID, proceed as follows:
1 Enter Setup Mode as described previously. The system displays the following:
SETUP MENU:
LOAD
DATE
2 Press F1 or F2 until the following appears:
SETUP MENU:
LOAD SYSTEM ID
3 Press ENTER. The currently loaded value appears on the second line of the display.
SYSTEM ID:
5630
4 Type the system ID of your FleetKey system. This number appears on your key layout.
5 Press ENTER. The display returns to the following:
SETUP MENU:
LOAD SYSTEM ID