Load working key – Gasboy FMS KE200 User Manual
Page 28
KE200 Setup - Standalone
Load Working Key
Page 22 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
6
To display another primary prompt, press F1 or F2 until the desired prompt appears.
7
To exit back to “SELECT OPTION”, press SETUP > PREV.
Load Working Key
Use “LOAD WORKING KEY” to load the 4-digit working key used with your FleetKey
system. This number is used to encrypt and decrypt Personal Identification Numbers (PINs)
when you encode your keys.
To load working key, proceed as follows:
1
Enter Setup Mode as described previously. The system displays:
SETUP MENU:
LOAD
DATE
2
Press F1 or F2 until the following appears:
SETUP MENU:
LOAD WORKING KEY
3
Press ENTER. The currently loaded value appears on the second line of the display.
LOAD WORKING KEY:
1234
4
Type the working key for your FleetKey system. This number appears on your key layout.
5
Press ENTER. The display returns to the following:
SETUP MENU:
LOAD WORKING KEY
6
To display another primary prompt, press F1 or F2 until the desired prompt appears.
7
To exit back to “SELECT OPTION”, press SETUP > PREV.