Gasboy FMS KE200 - Manual (Page 26)

KE200 Setup - Standalone Load Station ID
Page 20 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
2 Press F1 or F2 until the following is displayed:
SETUP MENU:
LOAD
TIME
3 Press ENTER. The prompt now reads:
LOAD TIME: HHMMSS
095521
The currently loaded time appears on the second line of the display.
4 Type the correct time and press ENTER. The display returns to the following:
SETUP MENU:
LOAD
TIME
5 To display another primary prompt, press F1 or F2 until the desired prompt appears.
6 To exit back to “SELECT OPTION”, press SETUP > PREV.
Load Station ID
Use “LOAD STATION ID” to load a number of up to three digits to identify the key encoder/
maintenance terminal. This identifier is similar to the site ID used in the FleetKey system. It is
used mainly to identify the station for communication with PCs or other communications
equipment.
To load station ID, proceed as follows:
1 Enter Setup Mode as described previously. The system displays the following:
SETUP MENU:
LOAD
DATE
2 Press F1 or F2 until the following appears:
SETUP MENU:
LOAD STATION ID