Gasboy FMS KE200 - Manual (Page 31)

MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007 Page 25
Configure ID Fields KE200 Setup - Standalone
14 To change the size (length) of the field, press ENTER. The currently loaded value appears on
the second line of the display.
FIELD SIZE:
4 0
15 Type the new field size and press ENTER. The display returns to the following.
ID FIELD #1:
FIELD
SIZE
16 To change another field attribute, press F1 to display the following.
ID FIELD #1:
FIELD
FORMAT
17 To change the format of the field (numeric or alpha), press ENTER.
Note: Fields used on CFN systems with the key option must be numeric.
The currently loaded value appears on the second line of the display.
FIELD FORMAT:
NUMERIC
18 Press F1 or F2 to toggle between choices. When the desired choice is displayed, press
ENTER. The system returns to “FIELD FORMAT”.
Note: Numeric ID fields can be set up as incrementing or decrementing fields to speed data
entry. However, these fields can only be encoded this way using the “LOAD FORMAT”
terminal command. See
“Load Format (LO FO)” on page 42 .
19 To change the attributes for another field name, press PREV. The display returns to the
following:
SELECT ID FIELD:
#1 EMPLOYEE,04,N
Repeat the procedure from step 9 onwards.
20 To exit to the “EDIT/VIEW ID FIELD” prompt, press PREV twice.
21 To exit to the “SETUP MENU” prompt, press PREV thrice. Then press F1 to select another
primary prompt.