Gasboy FMS KE200 - Manual (Page 39)

MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007 Page 33
Diagnostics KE200 Setup - Standalone
Diagnostics
The KE200 Key Encoder/Maintenance Terminal contains six diagnostics:
• RAM Test - tests RAM
• ROM Test - tests ROM
• Keypad Test - tests keypad
• Display Test - tests display
• Key Read Totalizers - displays number of keys read or written to
• Program Version - provides program version information and program date
To access any of the diagnostics, proceed as follows:
1 Enter Setup mode as described previously. The system displays the following:
SETUP MENU:
LOAD
DATE
2 Press F1 or F2 until the system displays the following:
SETUP MENU:
DIAGNOSTICS
3 Press ENTER. The system displays the first diagnostic test.
DIAGNOSTICS MENU:
RAM
TEST
To perform a RAM test, skip to step 4 . To perform another test, skip to step 5 .
4 Press ENTER. The message “RAM PASSED” or “RAM FAILED” appears.
5 To select another diagnostic, press F1 or F2 to display the available choices. When the desired
diagnostic appears, press ENTER.
Note: If you select “KEYPAD TEST”, press the keys on the face of the unit and verify that they
match the displayed key name. To exit from the keypad test, press ENTER twice.