Gasboy FMS KE200 - Manual (Page 60)

KE200 Setup - Terminal Print System (PR SY)
Page 54 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
Print System (PR SY)
Use “PRINT SYSTEM” to print the system ID for the FleetKey system.
At the asterisk prompt, type “PR SY” and press ENTER. The system displays the four digit
system ID.
Print Transactions (PR TR)
Use “PRINT TRANSACTIONS” to print a listing of maintenance transactions that were
performed at the KE200. The first transaction to print will be the transaction number shown in
the “FIRST TRANSACTION” field of the STATUS command.
At the asterisk prompt, type “PR TR” and press ENTER. The system displays a report similar
to the following:
The “STATUS” field will only contain a value if there was a problem when the key was
updated. In this case, the message “KEY WRITE FAILURE” appears.
Read Key (REA KE)
Use “READ KEY” to display a formatted or unformatted display of all information contained
on the key.
If you select a Formatted read, the system lists every key field and its value. If you select an
Unformatted read, the system displays all key information, but the ID fields are shown in a
string labeled “[ID field data]”.
1 At the asterisk prompt, type “REA KE” and press ENTER. The system responds:
“FORMATTED READ? ”.