Clear the maintenance table – Gasboy FMS KE200 User Manual
Page 36
KE200 Setup - Standalone
Configure Maintenance Table (1000 FleetKey only)
Page 30 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
6
To enter miles, press ENTER. The currently loaded value appears on the second line of the
display:
MILES:
010000
7
Enter up to six digits to represent the number of miles between maintenance (for example, if
maintenance “A” is to be performed every 10,000 miles, enter 10000) and press ENTER. The
display returns to:
MAINTENANCE x:
MILES
8
To enter days, press F1 and ENTER. The system displays the following:
DAYS:
0
0
0
The currently loaded value appears on the second line of the display.
9
Enter up to three digits to represent the number of days between maintenance (for example, if
maintenance “A” is to be performed every 60 days, enter 60) and press ENTER. The display
returns to:
MAINTENANCE A:
DAYS
10
To define data for another maintenance type, press PREV and repeat this procedure from step
onwards.
11
To define maintenance types for another class, press PREV twice and repeat this procedure
from step
onwards.
12
To return to the “SETUP MENU” display, press PREV four times.
Clear the Maintenance Table
To clear the maintenance table, proceed as follows:
1
Enter Setup Mode as described previously. The system displays the following:
SETUP MENU:
LOAD
DATE